Cleaning agents are substances that assist in removing dirt, grime, odors, and germs. When used correctly, they can make house cleaning easier. Knowing what to use where is the trick.
The following are some pointers.
Kitchen Counters
The easiest way to clean most kitchen counters is to wipe with a damp cloth or a cloth dipped in dish detergent and hot water. Alternatively, use multipurpose cleaner or sudsy disinfectant spray cleaner.
Remove countertop stains by applying a thick paste of baking soda and water and covering with plastic wrap overnight so it remains damp. The paste will draw the stain out of your countertop. The next morning, wipe the paste clean. If any staining remains, repeat the process.
Kitchen Appliances
Clean kitchen appliances with glass cleaner, all-purpose cleaner, or specialty cleaner.
Kitchen Sinks
Clean kitchen sinks with multipurpose scrub, baking soda, or all-purpose cleaner.
Wood Furniture
Wood furniture can be dusted with a slightly damped cloth, a specialty tool that grabs dust, beeswax, or furniture polish.
Showers and Tubs
Most showers and tubs, unless especially dirty, can be cleaned using any of the following: tub and tile cleaner, sudsy multipurpose disinfectant cleaner, multipurpose scrub, beeswax or shower wax, or with (daily) use of a squeegee and/or daily shower spray.
To eliminate a buildup of soap scum from bathroom fixtures use a tub and tile cleaner specifically labeled as soap scum remover. Alternatively, use multipurpose scrub made with a 50/50 mixture of baking soda and dish detergent or castile soap and scrub with a nylon scrubber. Rinse and repeat until all film has been eradicated.
To remove mineral deposits or stains from bathroom fixtures, use a specialty product targeting the specific type of mineral deposit type, or try an application of straight vinegar.
On hard surfaces that won’t scratch, a pumice stone might also remove stains.
To most easily remove mold or mildew stains, spray with all-purpose cleaner containing chlorine bleach, allow the solution to work for a couple minutes, then rinse. Alternatively, spray with hydrogen peroxide, allow the peroxide to work for twenty minutes or more, then scrub with a toothbrush or stiff brush.
Granite showers or other natural stone should be cleaned with a specialty cleaner or multipurpose scrub.
Clean glass shower doors or walls with glass cleaner, beeswax or shower wax, or use bathroom cleaner and rinse well, then buff dry.
Toilets
Clean your toilets using bathroom cleaner, toilet cleaner, vinegar, or all-purpose cleaner.
Floors
Clean vinyl floors with a little bit of all-purpose cleaner or vinegar in water.
Wood floors can be cleaned with a mop very lightly dampened in plain water or a mild vinegar and water solution, or a specialty floor cleaner for wood floors.
Marble or tile floors should be cleaned with plain water or a small amount of ammonia in water.
Windows
Windows can be cleaned by spraying with glass cleaner and wiping clean with rags or paper towels. Alternatively, mix a little bit of dish detergent or vinegar or ammonia into a couple gallons of warm water and use a squeegee, or wash with a rag or sponge and buff dry. If windows are especially dirty, use the second method for best results.
Maximizing the helpfulness of cleaning agents is all about knowing when and how to use them. The wrong detergent or cleanser can slow down your cleaning efforts or even damage a surface. Using the right cleaner at the right time on the right surface speeds up cleaning and maximizes efficiency. Knowing what to use where is the trick. Knowledge is power.
Comments